Follow the OUTBACK Plumbing Diagram, adjusting pipework for proper alignment. Install a 15mm threaded PVC coupling and pipe to bing the drain plug to the surface. Run conduit for light cables and earthing tabs, which must be connected before backfilling.
Yes, temporary or permanent pool fencing must be in place for safety compliance. Any inviting water source such as a pool exceeding 300mm in water
If the metal pool shell contacts backfill material, it must be covered with a heavy-duty bitumen waterproofing membrane to prevent corrosion.
Excavate a hole 300mm wider than the pool’s dimensions, and accounting for the depth of the compacted road base or concrete slab. Ensure the ground
Yes, the pool should be completely filled and left for 24 hours to check for leaks before starting the backfilling process.
Your electrician should supply 240VAC 10A circuits to power the sanitation system and lighting, with up to two GPOs preferred. If you’ve selected a heat
Each pool comes with pre-plumbed components. You’ll need to connect two pipes between the shell and the equipment. The equipment can be placed up to
