Each pool comes with pre-plumbed components. You’ll need to connect two pipes between the shell and the equipment. The equipment can be placed up to 20m from the pool. A licensed plumber is recommended for setup.
The water level is typically maintained 100-150mm below the top of the pool to ensure optimal skimmer operation and prevent overflow during use or heavy
Yes, the pool shell includes an overflow outlet. This is an optional component should you rewuire it to help manage excess water during heavy rain
Excavate a hole 300mm wider than the pool’s dimensions, and accounting for the depth of the compacted road base or concrete slab. Ensure the ground
Follow the OUTBACK Plumbing Diagram, adjusting pipework for proper alignment. Install a 15mm threaded PVC coupling and pipe to bing the drain plug to the
Yes, the pool should be completely filled and left for 24 hours to check for leaks before starting the backfilling process.
Install a 65mm continuous slotted AG pipe connected to a 100mm standpipe to monitor groundwater levels. Ensure groundwater does not exceed 500mm above the pool
