Yes, the UV sanitation system is designed for regular use and can handle high bather loads with proper maintenance. For extended periods of heavy use, occasional manual sanitisation may be needed to maintain water quality.
Essentially to 38°. However achieving this is very dependent on factors such as ambient air temperature, cover, location of Equipment.
Our internal lining by design is non slip. However, with a fibreglass or concrete pool poor chemistry management, namely pH can make the walls and
Mould doesn’t build up behind the liner. It can condensate, which is pure water. There is a drain plug to take care of this.
Unless otherwise speciifed the jet are on the back of where the bench seat is located.
Generally speaking a minimum of 500mm from the step is where the filtration and light will be.
Not normally. The liner is securely sealed to prevent water from getting behind it. Proper installation and maintenance are key to ensuring it remains watertight.
