Paint exposed metal areas with a heavy-duty bitumen waterproofing membrane. Ensure proper drainage around the pool by using a slope in the backfill material to direct water away from the shell. Consult the in ground install guide or engneering documentaion for specifics.
If the metal pool shell contacts backfill material, it must be covered with a heavy-duty bitumen waterproofing membrane to prevent corrosion.
Excavate a hole 300mm wider than the pool’s dimensions, and accounting for the depth of the compacted road base or concrete slab. Ensure the ground
Follow the OUTBACK Plumbing Diagram, adjusting pipework for proper alignment. Install a 15mm threaded PVC coupling and pipe to bing the drain plug to the
Yes, the pool should be completely filled and left for 24 hours to check for leaks before starting the backfilling process.
Install a 65mm continuous slotted AG pipe connected to a 100mm standpipe to monitor groundwater levels. Ensure groundwater does not exceed 500mm above the pool
The backfill material is a dry mix of cement-stabilised sand. Dpending on where this is sourced the ratio of sand to cement varies. Consult the
