Paint exposed metal areas with a heavy-duty bitumen waterproofing membrane. Ensure proper drainage around the pool by using a slope in the backfill material to direct water away from the shell. Consult the in ground install guide or engneering documentaion for specifics.
The water level is typically maintained 100-150mm below the top of the pool to ensure optimal skimmer operation and prevent overflow during use or heavy
Yes, the pool shell includes an overflow outlet. This is an optional component should you rewuire it to help manage excess water during heavy rain
Not normally. The liner is securely sealed to prevent water from getting behind it. Proper installation and maintenance are key to ensuring it remains watertight.
Yes, the pool should be completely filled and left for 24 hours to check for leaks before starting the backfilling process.
Install a 65mm continuous slotted AG pipe connected to a 100mm standpipe to monitor groundwater levels. Ensure groundwater does not exceed 500mm above the pool
The backfill material is a dry mix of cement-stabilised sand. Dpending on where this is sourced the ratio of sand to cement varies. Consult the
