Yes, ensure a minimum access width of 1 metre for delivery. For installation, there should be sufficient space around the pool for equipment and pipework placement.
Paint exposed metal areas with a heavy-duty bitumen waterproofing membrane. Ensure proper drainage around the pool by using a slope in the backfill material to
The backfill material is a dry mix of cement-stabilised sand. Dpending on where this is sourced the ratio of sand to cement varies. Consult the
Backfill in 300mm thick layers, compacting each layer to avoid voids. Ensure the backfill creates a 30-degree slope away from the pool shell to direct
Yes, the pool must be filled within 24-48 hours after installation to prevent the liner from sagging or deforming, which could affect your warranty. If
Yes, pools near bushfire zones may require additional considerations, such as fire-resistant barriers or equipment for firefighting purposes. Consult local guidelines for compliance.
Yes, we recomend permit planners in most parts of Australia to help streamline the approval process. These recomendations understand our porduct and have completed a
