Yes, the pool can be heated using alternative heating sources such as solar, wood fire, or heat pumps. These options can easily be integrated into the equipment system.
Essentially to 38°. However achieving this is very dependent on factors such as ambient air temperature, cover, location of Equipment.
Our internal lining by design is non slip. However, with a fibreglass or concrete pool poor chemistry management, namely pH can make the walls and
Mould doesn’t build up behind the liner. It can condensate, which is pure water. There is a drain plug to take care of this.
Unless otherwise speciifed the jet are on the back of where the bench seat is located.
Generally speaking a minimum of 500mm from the step is where the filtration and light will be.
The water level is typically maintained 100-150mm below the top of the pool to ensure optimal skimmer operation and prevent overflow during use or heavy
