Each pool comes with pre-plumbed components. You’ll need to connect two pipes between the shell and the equipment. The equipment can be placed up to 20m from the pool. A licensed plumber is recommended for setup.
Excavate a hole 300mm wider than the pool’s dimensions, and accounting for the depth of the compacted road base or concrete slab. Ensure the ground
Follow the OUTBACK Plumbing Diagram, adjusting pipework for proper alignment. Install a 15mm threaded PVC coupling and pipe to bing the drain plug to the
We provide partially pre-plumbed pools for easy installation. You are responsible for connecting the pipework and finishing the liner. In some cases, delivery partners can
Your electrician should supply 240VAC 10A circuits to power the sanitation system and lighting, with up to two GPOs preferred. If you’ve selected a heat
Yes, the shell must be properly earthed. An earthing tab is provided, and a qualified electrician must ensure compliance with electrical safety standards.
Yes, ensure a minimum access width of 1 metre for delivery. For installation, there should be sufficient space around the pool for equipment and pipework
